Articles

Product Group Specifications
Instruction Manual
Instruction Manual
Print
Print

> Calibration Video

> Temp. comp. for MW600

MW600 Standard Portable Dissolved Oxygen Meter

The MW600 is a Portable Dissolved Oxygen meter ideal for use in education, labs, aquaculture, environmental, wastewater treatment or pond and stream management. Anywhere accurate Dissolved Oxygen measurements are important and where Oxygen levels are continuously monitored to obtain optimal performance.

The MW600 calibrates using an easily “open air” 2 points procedure ( see video or technical tips links for both temp comp procedure and “open air” calibration procedure ). An optional carrying case is available model # MA750.

MW600 is supplied complete with MA840 D.O. polarographic probe which has a 3 m cable, calibration screwdriver, 5 spare membranes, a starter bottle of electrolyte solution for filling the membrane (model # MA9071s @ 20 mL) additional liquid will be needed model # MA9071, 9 volt battery and instructions.

MW600
Photogallery (click on the picture to see it bigger):

MA6730
Protective hard shell case (optional)

Polarographic D.O. Probe
Polarographic D.O. probe with 3 meters cable
Calibration, Maintenance & Cleaning Solutions
Choose from our wide selection of calibration, maintenance and cleaning solutions.
SPECIFICATIONS
O2 Range 0.0 to 19.9 mg/l
O2 resolution 0.1 mg/l
O2 Accuracy ±1.5% Full Scale
Calibration manual on 2 points (zero and slope)
Temperature Compensation automatic, from 0 to 30°C
Probe MA840 (included)
Environment 0 to 50°C / 32 to 122°F; max RH 95%
Battery Type 1 x 9V alkaline (included)
Battery Life approx. 70 hours of continuous use
Dimensions 145 x 80 x 40 mm
Weight 220 g (with battery)


ACCESSORIES
MA9070

Zero Oxygen Solution, 230 ml bottle

MA9071 Refilling Electrolyte Solution, 230 ml bottle
MA840 Polarographic D.O. probe with 3 meters cable
MA841 Spare membrane (5 pcs)
MA6370 Protective hard shell case
ORDERING INFORMATION
MW600 is supplied complete with MA840 D.O. polarographic probe which has a 3 m cable, calibration screwdriver, 5 spare membranes, a starter bottle of electrolyte solution for filling the membrane (model # MA9071s @ 20 mL) additional liquid will be needed model # MA9071, 9 volt battery and instructions.