Articles

 
 
Product Group Specifications
Instruction Manual
 
Instruction Manual
Print
Print

With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels.

The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below ( user selected ) the selected set point. These MC Controllers are ideal for CO2 or ozone dosing.

With each Milwaukee Smart controller, your aquarium will have the individual attention that it needs.

Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP)

Smart Professional ORP controller.
  • User selectable Hi/Low Set Point

  • Visual LED alarm

  • Supplied with 12 VDC adapter

  • 1 power plug for O3 dosing

  • Platinum ORP electrode (BNC connector)

MA921B/2
ORP Electrode with BNC connector and 2 m cable.

Calibration, Maintenance & Cleaning Solutions
Choose from our wide selection of calibration, maintenance and cleaning solutions.
SPECIFICATIONS
Range ±1000 mV
Resolution 1 mV
Accuracy ±5 mV
Calibration Factory
Set Point Range
0 - 600 mV
Alarm Active when reading is higher or lower than set point
Dosing Contact
1 power plug for O3 dosing
Electrode MA921B/2 (included)

 

ACCESSORIES
MA921B/2 Double junction, gel filled ORP electrode wizh platinum sensor, BNC connector, 2 m cable
MA9015 Electrode storage solution 20 mL sachet (25 pcs)
M10000B Electrode rinse solution 20 mL sachet (25 pcs)
 
ORDERING INFORMATION
MC510 is supplied with 12 VDC adapter.