Mi306 Specifications |
| Range |
EC
TDS
NaCl
Temp |
0.00 to 29.99 µS/cm; 30.00 299.9 µS/cm;
300 2999 µS/cm; 3.00 to 29.99 mS/cm;
30.0 to 200.0 mS/cm; up to 500.0 mS/cm
0.00 to 14.99 mg/L; 15.0 to 149.9 mg/L;
150 to 1499 mg/L; 1.50 to 14.99 g/L;
15.0 to 100.0 g/L; up to 400.0 g/L
0.0 to 400.0%
0.0 - 60.0°C |
| Resolution |
EC
TDS
NaCl
Temp |
0.01 µS/cm (from 0.00 to 29.99 µS/cm);
0.1 µS/cm (from 30.0 to 299.9 µS/cm);
1 µS/cm (from 300 to 299 µS/cm);
0.01 mS/cm (from 3.00 to 29.99 mS/cm);
0.1 mS/cm (over 30.0 mS/cm)
0.01 mg/L (from 0.00 to 14.99 mg/L);
0.1 mg/L (from 15.0 to 149.9 mg/L);
1 mg/L (from 150 to 1499 mg/L);
0.01 g/L (from 1.50 to 14.99 g/L):
0.1 g/L (over 15.0 g/L)
0.1%
0.1° |
| Accuracy |
EC
TDS
NaCl
Temp |
± 1% of reading (±0.05 µS/cm or 1 digit)
± 1% of reading (±0.053 ppm or 1 digit)
± 1% of reading
± 0.4°C |
| EMC Deviation |
EC
TDS
NaCl
Temp |
± 1% of reading
± 1% of reading
± 1% of reading
± 0.1°C |
| Logging |
Up to 250 records, LOG on demand or
auto-logging |
| Communication |
With PC through RS232 port |
| Calibration |
EC
NaCl |
1 point with 7 memorized buffers: 84 µS/cm,
1413 µS/cm, 5000 µS/cm, 80000 µS/cm,
111800 µS/cm
1 point with MA9066 buffer (optional) |
| Temp Compensation |
Automatic or manual from 0 - 60°C (can
be disabled to measure actual
conductivity and TDS) |
| Temp Coefficient |
0.00 - 6.00%/°C (for EC and TDS only)
default value is 1.90%/°C |
| TDS Factor |
0.40 - .080 (default value is 0.50)
reference temp: 20 or 25°C |
| Probe |
MA814D/1 EC probe with built-in temp sensor
and 1m cable - included |
| Auto-off |
After 5 minutes of non-use (can be disabled) |
| Battery Type |
1 x 9v Alkaline - included |
| Battery Life |
Approx. 100 hours of use |
| Environment |
0 - 50°C / 32 - 122°F; max RH 100% |
